Page 1 sur 1
allumage témoin ABS
Publié : 23 sept. 2008, 15:01
par pat28
Le témoin abs reste allumé au tableau de bord.le fusible 60A dans le compartiment moteur est ok.Quelle pourrait en être la cause?
Merci pour des infos.
Publié : 23 sept. 2008, 19:03
par lolo84
Salut, peut être un capteur HS ou un fil coupé !
A+
Publié : 23 sept. 2008, 19:22
par andreape
try to verify if some pipings of vacuum pump for depression are disconnected or damaged.....
Voyant ABS
Publié : 24 sept. 2008, 21:27
par Amat38
Andreape,
Could you tell me more about your explanation ? I have the same problem with the ABS light. I suppose this is due to a sensor or the wire but I'm interested to better know your information. Where are these pipings ?
Publié : 24 sept. 2008, 22:06
par andreape
i don't know the causes but a friend of mine told me he had an alarm on abs and preheating lamp...than he founded a broken tube from vacuum pump to sensors of engine. When he canged the broken tube the lamp of preheating and ABS switched off togeter. maybe he touched/moved some other things/wiring/connector with his hands but I was not there On my 80 i have not verified if some interconnection exists between brakes/abs and vacuum pump.